Questions & Answers for: apex gb65hd09w

Convergence IC's http://gainesville.craigslist.org/ele/533064171.html i haven't seen the tv yet or spoke to the owner about the problem, but would this be a simple adjustment or IC replacement fix? I ...

APEX GB65HD09W Convergence Issue! I have an Apex model GB65HD09W television. The convergence began going out and I found on the internet how to re-adjust the convergence on the set. followed the steps

...apex gb65hd09w has power going to it but it is not coming on no fuses appear to be blown is there some manual rest on this device. Pull out Power supply board you will find Poor solder connection ...

tv made sizzle pop sound and went out was watching tv and heard a noise simular to speakers that were blown sizzle pop crackle sound and it did this twice and then the whole thing shut off, there was ...

After the Tv has been on for 15 mins the color shifts and gets blurry. How can i fix it? I have the same TV and same issue. Sometimes I can whack it on the side and it is ok for a while. Was told most

how to take apart to move You have to remove the screen by unsnapping the front bezel then remove the long clips that hold the screen in, once thats done you have to remove about 8 bolts that hold the

...apex model, GB65HD09W with convergence problems. I have already replaced both stk 392-020 chips Is ther a fuse or resister feeding the B= to the chips? I checked all the resisterts in the area. After ...