Questions & Answers for: Rinnai take apart to clean

...clean mine and when I took it apart the burner mat was toast. Cleaned, preped and replaced mat and gaskets. Fired it of and it runs but the flame is mostly blue but has yellow flickers, and when it ...

...clean the flame rod. I don't see how to get at it without taking everything apart. Is that the only way? Unplug your machine. Removes screws on flame rod. To pull the rod out you will need to turn it ...

...flashes the number 53. Turning it on and off will fix this, but if we are out or late a night the apartment will get verr..rrry cold. This has happened half a dozen times. help you need to check

...left. Take a scotch-brite pad and give it a good cleaning. Reassemble everything the way it came apart and try the heater. There are two small rectangle metal covers held on to the heat exchanger ...

...clean the carbon deposits but be careful not to destroy the burner mat. You would have to take the combustion chamber apart to do this. Check you igniter gasket, this could be the cause of the smell. ...

...how to take apart my heater to clean it?... How to take apart my heater to clean it? Here is a manual for you. Just click the link and download ...

...of the cabinet. A through cleaning of the stove may be in order. This will require taking the stove apart some. If you are not ready for that I would call a Rinnai service person. ...

...apart? Can something be added to the water to help clean it? no you need to take a part to clean it I wanted to clean my humidifier tray. It was hard to get to, and probably not meant to be done ...

...probably just dirty and needs to be clean really well... Take everything apart and blow out everything with compressed air... Put it all back together again and you will probably be good... ...

...usually? So far, I did pull apart the heater and clean as much dust as I could but it didn't help. Thank you. ...