Questions & Answers for: Honda XR 250 R how do you take apart the bottom

My xr250r wont go anywhere. I have already took the clutch apart and it all looks fine, but the shifter doesnt engage the transmission from best i can tell. What do i do next Check to see that the ...

when I start my 1998 honda xr80r it revs to near full throttle, the throttle is not stuck in anyway I think it's the carb has a brand new carb maybe i did something wrong in the instillation it sounds

honda big red 250 how to put back together my buddy took apart my three wheeler motor when i was at work and i dont know how to put it back together Go to the site below where you can see a parts ...

...a 1981 Xr200R with a defect kickstarter(doesn't grip when you push down on it),took everything apart after the guy at the local honda center told me it's most likely a broken spring,all the ...

XR 250 duel card single cylinder. Took carbs apart to clean and noticed second card does not have a main jet is this normal, If you are familar with this setup , second carb starts to open when first ...

...dont come apart. i dont want to brake the forks I always change the seals without taking the sliders out of the bottom legs. If you look at the bottom you will see a bolt that holds the two ...

...now i cant get the bearing out? Hi There. There is no bearing in the forks. you are trying to take aparts the triple trees. to remove the front forks jack bike up remove front wheel remove fender ...

...cutting out. when i lower the throttle engine runs perfect untill i try to put the power back on . apart from not being right this is pretty embarrassing when trying to overtake. Please can you give ...

1984 honda xr 250 clutch won't disengage after taking it apart I took the basket apart to change the cam chain and after reassembling the basket 20 times, no matter if I slacken the cable or ...

...is getting great, spark, and still has great compression. I took off the carburetor, and took it apart and noticed that there wasn't any gas in the bowl, or throughout the carburetor. Does any one ...