...need to be bent open all the way around the gauge to get the top and bottom apart. Be Careful and take your time. And when your done it need to be tapped back into place to hold the 2 pieces
putting in new cam shaft seals left side it was all lined up when i took it apart but i didnt loosen the valve lash and now when i got it back together when the timing mark lines up the cam sprocket ...
...of the radiator , behind the radiator, on the frame, you will see a plate with two holes 1 1/2" apart for mounting the horn. You should also find one green and one black wire with flat tab style ...
i am trying to set timing on honda gl 1000 motorcycle the manual says when marks are in line the breaker cam dot points at left set of points mine points to the right set any suggestions thanks u ...
Question about 1975 GL 1000 (K1)
idles 1000rpm reves up slow is it out of time coils backwards point backwards???? Has the bike been apart this sounds very like a timing issue
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions