...off in the middle of vacuuming and I smelled a burning smell. I am thinking that if I can take it apart and remove whatever turned it off, it will run again. Your roller brush is probably bound
my orek has no power it won't turn on the spade connections are loose, take the handle apart and check them Check the top of the handle and make sure the power cord has been pushed all the way in.
...My husband takes a look at it and first thinks that the switch is out in it. He takes the handle apart and quickly realizes that it is not the switch that is causing the problem. Then he took the ...
...when powered on but the fan doesn't turn. I can turn it by hand. Any help? I have taken one apart. reassembled and the fan would not turn, although there was power to the motor and it wanted ...
Oreck vacuum is clogged in tube I can't figure out how to get it apart Snake it out with a wire hanger
how do I take oreck apart? 5 screws on bottom plate. Then couple to hold fan housing and motor. Not a bad job just takes a little juggling finesse.
...be possible to look through the intake nozzle and see your jam but you still might have to take it apart to get the jam out. Watch carefully as you take the vacuum apart so that you can put it back ...
take it apart no power I had the same issue. What I found upon taking it apart was that it must have fallen and the case was not making contact with one of the safety switches. Taking it apart was ...
HowAttach tools? tried to take the machine apart I don't think it takes tools, does it?
Question about XL Ultra Bagged Upright Vacuum
...have knocked the cord wires off from the switch in the handle. Can easily be put back on by taken apart the handle. Make sure vacuum is unplugged when working on
Usually answered in minutes!
230 Questions
81 Questions
49 Questions
34 Questions
29 Questions