Questions & Answers for: ap ssid

...SSID on the AP had changed to "802.11 SSID-bg" . This was causing my client bridge NOT to see the network. I came back to the main office, jacked my laptop into the AP. At this point, I am unable to ...

...AP configured for multiple SSID's and vlans. All works fine. The issue I have is when I save the config & reboot or power down the AP for any extended period of time and power it up again, it stops ...

SSID --------------------------- Hide -- Security - >> ETH02 AP Trusted Network no WPA-EAP ETH03 AP Guest Network no Plaintext [wifi1] Chipset AR5413 802.11abg NIC (rev 01) -- If -- Mode -- SSID -----

...AP mode. Both APs have the same SSID, channel, security mode, encryption code, loaded the latest firmware and reset/power up both APs. Still does not work. What am I doing wrong? find the ip address ...

...use the AP to enlarge my wlan. It should be the same network, the AP is connected to the router. Please help me. check your wi fi is enabled on ap settigns also che k broad cast ssid is enabled on

AP, anything all have individual "Names" or SSID's. So you need to use you PC, and search, for the SSID that you want, is a router, is being used, unplug, and leave for a few mins and restart, restart

...afterwards, I'm trying to access them but cant get into them?? Can an expert help me here?? All AP devices must use the same SSID, wireless channel, authentication mode (if any), and encryption

...AP's broadcast the SSID and that can be read off the air when you attempt to connect. Those are the 'available' networks that show up in the wireless network list. If you are trying to connect to a ...

AP. The SSID is not necessarily a number, it can be ASCII text, such as "MyAP1234" or "Linksys". You click on the displayed SSID you want to connect to and if it is encrypted, you will be asked to put

...ssid ap? and i just can factory reset ip ap hello, i've trouble with my ap levelone wap-1001, i don't know ip n password ap and i try too factory reset but just ip back to default (i was try follow ...