Questions & Answers for: anti skating technics sl

...anti skating correctly but it doesn't matter. Any ideas? thanks. Jim Hi, Assuming the the turntable is on a level platform and that you have "adjusted the weight and anti skating correctly", might it ...

...Technics SL-B2 and it works great. I do not have the manual and wonder if you could tell me what the pitch adjustment does. I've moved it back and forth but am not sure if it changes anything but am ...

skating outwards. I tried adjusting the weight and anti-skate but still the same problem. Any suggestions? If you're a real DJ then the Technics is the best TT to scratch on. Don't listen to that fool

skating properly? if so, how do you fix that? Hi the pennies will mess up the stylus. There should be an anti skate setting at the back of the turn table, a round adjustable bit with numbers, increase

Technics SL-BD20D turntable: Sound quality deteriorates towards middle of records; fuzzy and indistinct sound. I wonder if the tone arm weight is correct (it jumps at the slightest motion on the floor

skating" across disc but seem to have that fixed. Sound definitely not correct. What can I adjust? Hi sounds like the cartridge or stylus are not seated correctly or at correct angle (cartridge). Also

technics 1210s the tone arm pulls to the right on my decks making the needle skate your needles gone.or you've moved the tip by touching it. try & twist the tip back straight. A LITTLE TIP FOR YOU

Specs for Technic Sl1210M5G Turntable Hello, I am trying to set the anti - skate and tone arm hight on my turntables what are the proper specs, thanks. Anti skate should be set the same as the weight,

I need a tonearm replacing on an SL1210 MK5 turntable, the anti skate spring is busted I think? Need somewhere in Australia, preferably brisbane. The anti skate spring is not part of the arm assy but ...

...anti-skating with an old stylus. That can pull a needle back over and over again around the center of the record. Try setting the anti-skating at 0% and see what happens. Also set your tonearm height ...