...2000 Chrysler Concorde. After picking up the car I noticed that shifting the automatic lever in/out of gear seemed difficult. I took the car back to the mechanic and he stated that the shifting cable ...
...2000 Automatic that I am trying to pass the Calif Smog test. It passed to emission Test. It failed for (OBO Code)P0705 Trans Range Sensor Malfunction (PRNDL Input). The Service Check engine Light is ...
...2000. the probelm is beciminung moire frequent - having turned on the car, foot on brake - trying to release lever from park position - it sticks/ won't release to reverse etc.. Am concerned will ...
...2000 Ford Taurus locks up, where I am unable to switch gears before driving. I have to first turn off the ignition and then switch gears while ignition is off before I can drive off. I think this ...
Ignitin switch will not move with key How do you you replace.... remove the old one Before you do anything with the ignition key check the gear shift lever is not stuck in gear or there is no problem ...
My 2000 Honda Valkyrie won't start. Replaced the battery, replaced the starter button assembly (whole right side switch assembly) with a new part directly from Honda. When I turn the key everything ...
Question about 2000 F350 Super Duty Super Cab
2000 7.3 stalls going 70 mph or anytime have to turn key to off position before it will restart It stalls setting, driving at any speed, going 70 MPH or whatever. When it stalls you can put it in ...
Question about 2000 F350 Super Duty Super Cab
2000 Dodge Stratus SE stalled when backing out of drive way 8 months ago. Had fuel pump replaced. A month later the vehicle would not start after sitting parked for 24 hours. Mechanic took 4 months to
Question about 2000 F350 Super Duty Super Cab
...2000 I am going to suggest 3 things. Check your starter interlock switch on the brake pedal lever. Often your brake lights will not work when the interlock switch is broken or out of place. This will ...
...and how would anyone of them keep the engine from staying running? I don't have the schematic diagrams and would appreciate some help! If you've done the relearn three times and it still doesn't
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
