Questions & Answers for: Alpine amp fuse

Question about MRP-M650 Car Audio Amplifier

1 Answer

amp fuse in the fuse holder would I need to put a 60 amp fuse into my fuse holder or would it be alright to keep the 100 amp fuse in? try a 60 amp fuses if it doesnt blow when you crank it up it safer

Ad

Question about PDX-1.1000 1000W x 1 Car Amplifier Car Audio Amplifier

1 Answer

i just purchased and had installed an alpine pdx-1.1000 amp. powering 2 12" jbl's. while the owner was demonstrating this to me, we had it going loud, and it blew its 4 fuses. once he replaced the ...

Ad

amp fuse under hood the amp fuse and the in line fuse from radio and fuse box all good. Is there a code or something wrong with amp. This is driving me nuts I can't get power to unit. Please help When

Question about MRV-T707 Car Audio Amplifier

1 Answer

fuse box and wire this amp directly to the battery via monster cable. make sure you attach a 30wieght fuse to the monster cable that is running from the battery to your amp. ground the amp against the

Question about MRD-M1000 Car Audio Amplifier

2 Answers

amp. I dont a fuse connected to the hot wire (yellow) which is connected to the amp. Maybe too much power from the battery went to the amp and blew it? Maybe the amps 2 fuses blew? make sure and check

Question about MRP-M1000 Car Audio Amplifier

1 Answer

...having to replace the amp and instead replace a few dollar fuse also check the fuses where you had this pluged in. hope this helps a little. if you give the amp type i may be able to help a little ...

Question about MRD-M1001 Car Audio Amplifier

1 Answer

...fuse for 30 amp fuses. I tried this for about 1 minute and it seemed to work fine but i disconnected it because i did not want to damage the amp. after i disconnected everything i tried to put the 20 ...

Question about PDX-1.1000 1000W x 1 Car Amplifier Car Audio Amplifier

2 Answers

car battery and now my amp does not power on. Whats the problem? fuse may be blown on the amp All the fuses on the amp and power wire are good. the fuse on the power wire is an 80A. is that big enough

Question about MRP-T220 Car Audio Amplifier

1 Answer

Fuse on my amp is good. In-line fuse is good. But it keeps blowing the radio fuse in my panel.. ? Please help.. Thanks Ryan Check the amp turn-on wire. It's a blue/white wire running from the radio to

...way to the amp. Amp light wont turn on, I previously blew the 100amp fuse and replaced it. Are there fuses inside the amp? I checked the two 30 watt fuses and they look fine. Do you have a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio and Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...