...wires the Better amp will perform, Will not clip signal as easy and Current draw may be lower because your not clipping signal. A clipped signal is close to DC and Amp or speaker will eventually
can't connect amp to speakers Just bought a cambridge audio 540a amp with mordaunt short 914i speakers. Alos bought leads with banana clips...but don't see how the leads can be connected to the amp. -
...clipping. Nor, is an amp output likely to overdrive the subwoofer. On second thought, why are you using an amp with it turned off? Have you tried turning on the amp whcih provides the signal to the ...
...clipping on nad 372 amp I have constant clipping problems with the Nad c372. dvd,classical music,cable movies. Unit in always clipping and shutting down. it is the same if i use soft clipping switch ...
...is just that...the signal is being clipped/distorted and the clip light comes on to protect the amp/speakers from blowing. You need to check your signal and then cables and wiring to see where
Question about SP5 Main / Stereo Speaker
amp that is clipping i have a behringer 1500 watt amp that is soley pushing a 800 watt 18" carvin sub yet its clipping my amp. Whats the deal? What is happening is that your amp can deliver 1500 Watts
...amp and subs to their limits. Clipping is not a good thing, but at the same time it usually sounds the best just before clipping. You may need larger gauge wire or a capacitor to help the amp get ...
Loose (noisy) Headlamp when driving I have a Honda Innova 125 and while I am driving, its headlamp makes small noises... just like its not clipped on properly... anyone available? Take it apart & ...
Question about Zpa150 1500-watt Professional Amplifier
b channel cuts off after a few minutes after a few minutes of use the b channel quits. and amp also clips very easily? Speaker is blown or amp channel is. Swap channel connections from a to b, etc, ...
Question about 1604 Vlz3 16 Channel Mixer
...clipping your amp, then the mixer is working and at least the front end of your amp is working to register the clipping. In that case, your problem is- 1. The amp outputs are blown, check by hooking ...
Usually answered in minutes!
691 Questions
481 Questions
237 Questions
236 Questions
240 Questions