Questions & Answers for: amp blow fuse turn volume

Ad

Question about 1000/1 Car Audio Amplifier

2 Answers

amp not to blow fuses, because you should be able to go to full amplitude on your amp without blowing anything. As I alluded to this sounds like an impedance mismatch problem. I hope this helps, Thank

Ad

Question about C350 2-Channel Amplifier

1 Answer

blow fuses with nothing hooked up, have the amp fixed. If the fuse holds, shut down and connect the speakers, leaving the volume controls down. Power up and see if your fuse holds. If you have hum, an

Ad

Question about C350 2-Channel Amplifier

1 Answer

...amp that is blowing the fuse with the volume being turned up, this means that the output stage is partially working. The short or over-draw of current must be in the output stage, or what is loading ...

Question about KAC-9152D Car Audio Amplifier

1 Answer

amp keeps blowing out when i turn the volume up, i have two 12'' cvrs in a sealed box, ran into one channel @ 2ohms which is good with my amp,(it was also blowing fuses with them hooked up in separate

Question about KAC-9152D Car Audio Amplifier

1 Answer

...amp just isnt bumping what it used to, everytime i hook my 2 twelves up and turn the volume up to where its bumpin good.. one of the fuses on the back of the amp blows....someone told me that ...

Question about Reference 1300a Car Audio Amplifier

2 Answers

amp keeps blowing fuses First off which fuse is it? The inline fuse from the battery or the amplifiers power supply fuse? Blowing the main fuse from the battery is caused by either the load (your amp)

Question about Xplod 1200W Class AB Bridgeable 2-Ch. Amplifier w/Variable Low-Pass Crossover

1 Answer

...a 40A that keeps blowing right now. with no signal input the fuse should not blow ,if it blows then the amp has a short on it ,if it blows when the volume is turned up really high the try 60 amps

Question about D5-600.4 Car Audio Amplifier

1 Answer

...amp will blow fuses as cant handle the output to your subs. for example. you have 2 500 watt subs and a 300 watt amp, that is no good as amp isnt powerful enough. if you have 2 500 watt subs you need ...

Question about OVN2-800 Car Amp

1 Answer

...I connect my 2nd sub, the amp blows fuses. Each sub plays fine individually. Does your fuse blow when volume turned up, or does it blow straight away when turned on? What watt is your subs and

...amp blowing fuses what would cause it. blowing fuses alway mean you have a fault with the device, if fuses still blow with nothing connected to the speaker outputs then the fault is internal. if the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5047 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Are you a Car Audio & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...