Questions & Answers for: american standard toilet enough water

...american standard one piece toilet purchased in 1979. Recently plumber installed new fill valve model #2003 no vent away. Inside tank there is date nov 10, 1977 828 2003 K77. Have to flush 2 or 3 ...

...TOILET FLUSHES WITH POWER AND SOMETIMES BOWL FILLS WITH WATER AND DOESNT GO DOWN AT ALL OR SLOWLY DRAINS .SEWER LINE IS CLEAR .I INSTALLED POWER VENT DIDNT HELP.CAN IT THE WAY THE BOWL IS SITTING ON ...

standard toilet will not flush I have a two story colonial that has 2 1/2 baths. On the main floor is the powder room and almost directly above the powder room is the master bath. Both of these ...

...toilet bowl, it flushes just fine and the water level stays down. How can I fix this? Alot of times this problem occurs when there is not enough water in the tank behind the seat and bowl. Lift off ...

...american standard cadet 3.Home depot rated this toilet as a 10 for flush power. when I flush 1st off the flapper wont stay up on it own long enough to flush,2nd if I hold it open it is then a weak ...

not enough water in the bowl Check that the fill valve has a little plastic hose going into the overflow tube.

...American Standard has a history of having small water surface areas in their low or ultra low flush toilets. Take a large container of water and pour directly into the bowl. If the ending level ...

American Standard Cadet3 Right Height Elongated toilet installed. After flushing, water level in the bowl drops to a very low level. Enough remains to prevent gasses or orders, but just enough. I have

...enough water so it will not splash? This is diagram of a typical toilet tank setup if the refill tube is not putting water into the flush valve as pictured the toilet will do what you have

...American Standard Champion Toilet? There is no torque value as far as I know. There should be rubber washers to minmize the chance of cracking the ceramic and to provide a water seal. But to try to ...