Questions & Answers for: altec base working

...Altec Lansing ATP3 and recently, I stupidly/accidentally sliced up the cord from the right satellite speaker where all the controls are located(i.e. turn-on vol, base and treble control). I tried ...

...base. The white wire has the wires for the controls. That white wire is .090 in in dia. Peel back the white pvc insulation and you will find a layer of aluminum foil which is intended to shield the ...

...Altec Lansing portable Speaker system, it will not play- it goes to writing, connecting - "connected" state. is there a charger (cord plugged into the base) plugged in? i can charge my Sansa e250 ...

...Altec-Lansing base and window antenna for several years and I occassionally use the unit in my car with a roof magnetic antenna. Recently the unit has experienced weak signal at the desk and then ...

Base Spearker not working Just bought Altec Lansing BX1121 Speakers and the base is not working. Smaller speakers are great. I got mine today (not new) and took it apart and saw two wires that SHOULD ...

...altec lansing . . Based on the number of recurring problems in this area, with this unit and these speakers, which precisely replicate your problem, which results from fusing of the speaker ...

Altec Lansing AVS500 is that there are no screws to be able to take apart the base so you have to brute force pry it apart and then the jacks and controls are also glued onto the front plastic face of

...working one. Shut off power to base unit. Take speaker apart, remove six screws on back. Measure resistance across speaker with ohm meter, should be 8 ohms. If not 8 ohms, replace speaker with higher ...

altec lansing multimedia speaker model ATP3 woffer is giving tearing sound at high base and it seems the woofer is not working at all Your woofer is bad, probraly blew the megnatic coils, and if ...

Is there a way to use the Altec Lansing VS4121 Subwoofer as a stand alone? I adopted the Altec Lansing VS4121 subwoofer but do not have the satellite speakers. I was hoping to just use it as a ...