...ALPS MD-5000 printer that has been sitting unused for about 2 years. I powered it up yesterday, and now get a flashing error light. The error I get says something about the print motor or head being ...
ALPS Printer MD1000 Driver I wish to use a Parallel Port printer (ALPS MD1000) with a laptop with only USB ports. Have purchased a BAFO BF1284 cable to do this with, somes with software. Drivers used ...
...light flashes I have been trying to set up my newly aquired MD5000 printer but when I try to print a test page the paper stops half way in and the red light flashes. I have no set up instructions and ...
...alps md1000 from ebay, the driver loaded ok but i need to know if the printer will function with just one cartridge there are some used cartridges with it that look kind of rough, the printer flashes ...
how to test the MD 1300 , also look on how to get error codes... One test you can run is the self print test. Discount the printer from your computer. Load a single sheet of paper and the CMYK ...
won't print Make sure you have the standard ALPS ink cartridges in the printer (dark gray). I've seen people getting a flashing error light when trying to use the photo cartridges (dark blue) to print
alps printer wont print Printer is setup fine, I press print and it loads the sheet but then ejects it with nothing on. Ready light is flashing green Do you have the correct cartridges in the printer?
...and error lights start flashing Check to make sure you have the dark grey ink cartridges installed in the printer. The blue (photo) and the Econo Black cartridges cannot be used for the self
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions