...allen wrench do I need to fit caliper mounting bolts on a 94 chevy corsica. Have tried metric and english some are 7/16 and some are 3/8 amd some are torx You need a 3/4th hex tool for the job just ...
what size allen wrench is needed to remove the stand pipe plug for the transmision it takes a 3/16 allen key
need to replace my starter, 1989 dodge ram d50, what size are the allen bolts?and how many? There are no allen bolts on the starter( should not be). They are 9/16 bolts.
...size? What size wrench or allen key do I need to remove the transmission oil filler plug on a 2009 FXDL Dyna Low Rider? I haven't looked at a 09 model but earlier models used a 7/16 inch allen
...will not spin when engaged. If i remove the blade the shaft does rotate. Use a 15/16 open end wrench an correct size allen wrench. Loosen nut (15/16) ccw while holding allen. Geez how dumb are
16 nut and an allen bolt hold the allen and loosen the nut then turn the allen in until it lightly seats then back out 1/2 to one full turn hold and tighten the 11/16 nut replace cover go to the cable
...Frame and suspension too close for clearance?? if your talking about the drain plug between the shocks on the transmition, I use a long ball allen to get up under there. I believe its a 5/16
...a 5/32 and 3/16 allen wrench but 5/32 is too small and 3/16 is too big. What am i missing? Thanks It sounds like you need a set of METRIC allen wrenches. Then the 4mm one will fit. Rgds, ...
owners manuel for allen heath wiz3 16-2 Here you go- http://www.allen-heath.com/media/W3UG_122-162_AP5331_5.pdf
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions