Questions & Answers for: Jeep Wrangler akon new

Swaped stock 4.0L with a 4.6L Stroker, engine only idles 2002 Wrangler 4.0L, swapped engine with a new Titan 4.6L Stroker. New cam and crank sensors, 4 new o2 sensors, new 24lb injectors, new 62 mm ...

Ad

Question about 2006 Wrangler

1 Answer

New Fog Lights Won't Work Put in new head lights and fog lights...but new fog lights won't work. Put back in old fog lights and they don't work either now. check fuse 19 in the fuse blocks under the ...

Ad

Question about 2006 Wrangler

1 Answer

I put in new head lights and new fog lights. New fog lights don't work. Put in old fog lights and they don't work either. test + wire @ foglamp to verify 12VDC Trace +wire to fused link. Check fuse.

jeep wrangler yj 1987 2.5l problem???? Hey guys first: new stuffs: the head gasket, new plugs, new head cover, new shift cam kit, New water pump, new spark plug, new injector, new fuel filter, oil ...

91 Jeep wrangler New everything idles rough, no Power then dies 91 Jeep wrangler New fuel pump, new fuel filter, Cleaned tank! new plugs, wires, cap rotor & coil. Starts, Idles rough runs good at ...

i have a 1995 jeep wrangler and my front brake calipers have started locking up on me ive put two new calipers on two flexi pipes on two new discs on new master cylinder on one new brake pipe cant ...

at 50mph it atartas shaking i bought new tire, new brakes been bal,new rotors new calabers any one have a clue? 2003 jeep wrangler have some one remove the drive shaft and check the u-joints, sounds ...

new head gasket new t stat(180) new radiator ,,,gets hot after 20 minutes Take it back to where you got the work done.Radiator is proberly blocked.If not.Bad job done.Hope this helps

clutch seems to be slipping I put everything in new i put new master slave cylinders new lines new clutch refaced fly wheel Sounds like bad clutch but that should have been replaced when fly wheel fly

Question about 2006 Wrangler

1 Answer

gas gauge reading wrong One of two things: either the gage itself is malfuntioning or the float/sending unit in the gas tank is failing. Disconnect the plug at the tank for the sending unit, pick up a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...