Question about PDP-4249G 42 in. EDTV-Ready Plasma Television
Akai pdp4249g plasma television. Every time I turn it on the tv goes to a blue screen and says auto signal selecting and it tries to detect a signal. It will say signal searching for a few seconds and
...tv just stopped working. We can't turn it on! First do a hard reset by unplugging it for a couple hours, then plug it in and try again to power it on. If no change, or power light just flickers then ...
TV here you can see what capacitors look like' http://nucth.physics.wisc.edu/personnel/yamac/Phys102/capasitors2.jpg those 4 there. then 6 below http://en.wikipedia.org/wiki/Capacitor see the link Are
Akai LCT2701TD Color problem My color all of a sudden is not working. the faces are all yellow green and the colors on the screen are basically yellow green and blue. I tried to adjust it with the ...
Question about PDP42Z5TA 42 in. Plasma Television
...tv signal I have a 42 in Akai PDP42Z5TA. Its worked great for 1.5 years. Now after being turned on, the menu screen flashes for 1/2 second approximately every 1 second continuously. The control ...
...Akai remote or TV) to get the on light. When the on light comes on once, it takes another 10+ pushes of the power button for the TV to stay on. Akai LCT2721AD Thanks for your help! You only have to ...
Question about LCT3285TA 32 in. LCD Television
...AKAI logo for about 3 seconds. The screen will go black and the power indicator will go back to red/standby. I looked over the power supply and, other than some dust, I didn't see anything ...
Question about LCT3285TA 32 in. LCD Television
AKAI WAS TURNED OFF LAST NIGHT TV HAS POWER THIS MORNING BUT NO PICTURE OR SOUND. Try a hard reset to this set, and check. If it do not help you, its main board is faulty. There are two types of reset
...hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to ...
Question about PDP42Z5TA 42 in. Plasma Television
AKAI HD TV DVB-T32W. When I started out first time, it autoscans but found no channel. press DTV or ATV, it,says "No channel. need to rescan". But nothing happens, thanks Main system control memory IC
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
