Questions & Answers for: air cable sharp tv

Question about 27H-S60 TV

1 Answer

cable/air i can switch tv from air reception to cable. i have a one for all remote, and after selecting menu i cant scroll down to the air/cable selection to effect a change you will need to use your ...

Ad

...air setting to cable setting I am not able to switch from air setting to cable setting on tv with cable universal remote. The cable universal remote has been programmed to turn off/on tv and volume, ...

Ad

Question about Aquos LC-32D40U Television

1 Answer

the vcr's channels. set it up to use cable not air. when the vcr was unlugged it lost it's channel memory. don't buy new cables, you're getting a picture and sound so that means your rca cables are ok

Question about Aquos LC-45GD4U 45 in. LCD HDTV

1 Answer

...cable or free air signal not getting from air antena,cables or dishes signals,or strong enough comming through.Get a better antena,like a digital antena,or a roof antena for better free air ...

Question about 13N-M150 13" TV

2 Answers

...air Digital tv.Must have pay cable tv to get a signal,if don't have coverter box.If u have a crt tube tv or u get nothing,but statics. Easy plug and play. Works great with noticeable loss of ...

Question about LC-32SB24U 32 in. LCD TV

1 Answer

...cable vs over the air antenna. When power was lost, this setting may have defaulted back to factory (Air / Antenna). If the cable tuner is damaged, you don't need to write off the tv just yet. Try ...

Question about 13VT-R100 13 in. TV/VCR Combo

1 Answer

cable to air. Can someone help? For sharp TV-VCR Combo with universal remore control, 1/ Start by pressing SET & TV at the same time, the LED goes solid RED 2/ Press 009 or whatever code works for

Question about 13VT-R100 13 in. TV/VCR Combo

1 Answer

air to cable using remote ga263wjsa My mother touched the a- antenna button and now it's in air mode.can't switch back to cable .no button? Press a button on the remote that said tv Menu.Goto SETUP,go

Question about AQUOS LC-32GP1U 32 in. LCD HDTV

1 Answer

enter on the tv remote.Pick AIR not Cable and push enter on the remote again.Now tv go in auto scanning.After it is done searching all cannels,ur tv will get all the free DTV air broadcasting channels

Question about LC-26DV24U 26 in. LCD HDTV/DVD Combo

1 Answer

it goes to 3.1 digital. the cable wants analog? Go to the Tuner setup screen and select cable instead of air. Then put the TV on Channel 3 and connect the cable box to the antenna connector on the TV

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...