Questions & Answers for: agitator removal old roper washers

Question about RAS8445KQ Top Load Washer

1 Answer

roper washer It sounds like the whole machine locked up. It's full of water and will not agitate. A grinding noise.It's only 4 years old. Sounds like you have a motor coupler problem. Its located ...

Ad

Question about RAS8244KQ Top Load Washer

9 Answers

agitator want turn but the bottom does. Can I remove the cap and pull the top off to inspect the shaft? My Roper washing machine will fill with water but nothing else. It will not advance. When I turn

Ad

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

...old Roper washing machine. A couple of days ago, it would not spin in the spin cycle. Now it won't agitate in the wash cycle. So it only fills with water and empties the water. When it is in the wash ...

...old type stains, especially on white clothes where it is easier to see. where do i look for a leak or faulty seal? or where else could it be coming from Remove agitator cap. Remove bolt underneath. ...

...old Roper machine that will not spin or agitate. Motor comes on but no movement. Tried to move by hand and it won't move. Is it time to let it go? Good day, If the motor runs, and the water will pump ...

...Old school washers: Newer models: You have bad agitator " dogs " . These 4 small pieces grip the upper agitator portion and make it turn in a racheting motion . You have to remove the center cap by ...

...old roper washer leaves grease on clothes. On spin cycle the machine makes a screaching noise, and the clothes don't spin dry. Possible that the belt is slipping and also there is some issue with ...

...old Roper washing machine fills up, washes/agitates the cloths, drains them when the washer get to the rinse line to start the rinse cycle it stops, and all I hear is a humming. The machine will not ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...that. There's usually a lot of friction in addition to the bolt holding it in place, so you might use an old towel slipped under the agitator and cinched to give you more leverage/grip. Good

...old. It will fill with water but won't agitate, rinse or spin. It will drain. It makes a horrible noise during all cycles except when filling with water. Any ideas of what the problem is or might be? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...