Washing machine-dryer AEg Hi,Every time a do wash mywhite towels they coming out with dark spots(like something stains it). Any ideas what could cause it, becouse it seems only effect white washing. I
...on the blue, voila! u hv your manual on line. And dont forget to rate me, on this great site. operating manual for AEG Lava Combo 1000 front load washing machine replace drum bearing on aeg ...
Question about Lavamat 88840 Front Load Washer
...AEG lavamat 6955 sensorlogic washing m/c, was showing F2, cleaned out pump,spin cycle continued OK but now F3+1000+900+spin lights flashing. Any ideas?'' Waited half hour; on start up F3 had ...
Question about L12700ViT Front Load Washer / Dryer
...for the bearings to fail? Much too soon if used in a domestic environment, but possible (even on an AEG) if used commercially. Failed bearings are usually noisy all of the time though and without any ...
...bearing has gone on an AEG 72640 washing machine - is it a drum out repair or can it be done with drum in situ ? I can see that the bearings are available no problem. Would any other seals be needed ...
I have an AEG Competence Single oven model B2100-1-w The oven is not reaching or holding temperature I have noticed the fan is not spinning Hi steve sounds like your fan motor is faulty they are not ...
Hi, I have an AEG 72630 Update machine, its been very noisy for a while on spin cycle but now is making a rattling noise & is leaving black spots on clothes, could it be bearings?? Yes this is the
Question about Lavamat 72640 Front Load Washer
AEG Lavmat 835 washer will not reach spin speed Starts spinning and then stops ? Possible fault in the motor , the bearings the drive belt or there is friction on the drive shaft.Please check ...
Question about Lavamat 72640 Front Load Washer
hy guys, we have an aeg oko lavamat update starlight. first it was showing the c7 error code than we have reset it and it emptied the tank. but when she tries to start the programme she does not load ...
...AEG Lavatherm 33600. I replaced the belt yesterday on this machine and all looked fine. After a couple of hours use a strip of felt popped out of the front of the drum and tangled with the clothes. I ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions