Question about eXplorist 500 GPS Receiver
500) Windows New Hardware Wizard shows appropriate dirver is oem45.inf for NMEA mode, and another oem65.inf is presumably for USB mode ( I haven't checked this). Explorist Settings: -Menu/Adv.Features
...ADV-500 SD reciever,when i put discs in the machine,the LCD displays a message saying disc error. It happens with every disc i try and can no longer watch films on it,what can i do to resolve this ...
adv-500 sd. The cds or dvds wont load properly and takes ages, wont open first time and today I got the word mechanical error come upon the display I palyed some music and after 2 minutes just stopped
...adv. Check to see if is blowing out defrost vents if it is you have a vacuum leek. The tube is hard to get to take of dog house you will see a group of tubes on connected to a clear plastic junction. ...
...500 rpm. and that full advance should be something like 30 degrees at 1500 rpms. Now use the Tach/Adv button to select degrees. Use Dec/Inc to adjust that number. Then switch to tach and adjust it to ...
500. pl adv. is it worth to repair it. ibrahim.chennai It is not worth repairing at such a cost as it is bettter that you can buy a newer model with an extra bit more. Also sometimes it is possible to
Question about 2006 Altima 3.5
Adv" was stuck at greater than +35. The MCU is dmb and smart at the same time. Never was there an error for timing sensor but I un plugged my suspected sensor !!!little risky!!! With dual overhead cam
...500 rpm. and that full advance should be something like 30 degrees at 1500 rpms. Now use the Tach/Adv button to select degrees. Use Dec/Inc to adjust that number. Then switch to tach and adjust it to ...
Usually answered in minutes!
1,678 Questions
1,343 Questions
1,187 Questions
1,096 Questions
889 Questions