Questions & Answers for: adjusting binoculars double vision

two tunnel visions I have two tunnels, when looking through. I did adjust the binoculurs, according to the width of my eyes. Which would seem to be an obvious fix. But, did not work. Objects, when ...

double vision I have a pair of bushnell 10x50 binocs i get double vision when using them. The distance between the centers of the eyepieces of your binocular must be the same as the distance between ...

Double Vision No matter what width I set the eye pieces I have two images. Is there a way to adjust this or a repair that needs to be made. Thank you, dg1811 Check this response and see if it might ...

...binoculars are giving me double vision http://www.cloudynights.com/item.php?item_id=416 We can align yur binoculars for your for 25-30.00 plus 5.00 to ship back to you. Some units have handy set ...

...adjusting the view but still have this blurred double image. I was having a double vision problem with my Barska 10-30X50 zoom, 195FT/100YDS binoculars. One image was always higher than the other. ...

...double vision it is out of collimation (alignment of the optical axis). You need to send this to the manufacturer for repair. My 16x50 PCF Binoculars have an Allen adjustment screw under the rubber ...

...binoculars now they will not adjust (double vision) Hi, One of the lenses or the mirror has been jolted loose. Back to the manufacturers with them to see what the repair cost will be.. Not sure if it ...

...double vision. Check on the binoculars to see if there is a place to adjust the alignment of either of the oculars. Look for any loose screws that may cause the two oculars to be out of alignment. If ...

...double vision. Can focus each side by themsleves but not together. Sorry to say but it sounds as if the binoculars have suffered a jolt. All bincoculars are collimated at the factory so they will ...

...a little double vision. Where can I send them to get them fixed and about what will it cost? Also one rubber eye peace does not adjust right. You need to contact the manufacturer for repairs and