Questions & Answers for: adjustable levers yamaha virago 250

Wifes hands too small to reach levers 1989 Yamaha 250 Virago: Does anyone make adjusted or adjustable levers for this bike? Yes there are aftermarket companys that make adjustable levers for bikes.

The lever for my back break will not return to its upright position after pressing the break. I think this may be due to the break cable. The pedal has lost its 'springyness' but when pressed the ...

i have a 2002 xv 250 and when i shift into first i can feel the clutch grab slightly i tried to adjust the clutch lever but that did not work also chain seems to be making excessive noise while riding

engine cuts out when put into gear Does it lurch forward a little? If so, First thing to check is the cable adjustment. As you pull on the clutch lever, you should be able to feel a little free play ...

I have a 1988 Yamaha XV250 Route66 it dies when put into gear Hi, Anonymous and the usual suspects are: 1. Faulty wiring to any safety switch. 2. Safety switches loose at the mounting point. 3. Faulty

The new rear brake cable is way too long. I re-checked the part number and it is correct. It is routed correctly. But with the tension fully adjusted, there is no braking at all. I tried removing the ...