...valves I need to know how you know if the reed valve is bad on kx 125 looks to be not broken or chipped or bent open in any way... The reed valve assembly should hold solvent withot leaking. Remove ...
...but start with one. A ?very helpful? rating for this answer? Thanks! does it have a power valve adjuster on the side of the cylinder if so you need to adjust ...
...It kills the engine so that you don?t start out with the side stand down. If broken or out of adjustment, it would kill the spark. Check for a broken wire at the side stand switch and coupler. ...
my kx 2005 was runnin great them started bogging randomly changed reeds top end and cleaned carb... Well - not knowing the condition of the bike it could be a lot of things. I would start with a fresh
...without running these components must be "PROPERLY" cleaned and reassembled "CORRECTLY" before any adjustments can be made. Tuning your carburetor is fairly simple once you understand the basic ...
how to tune up fury 125 motorcycle clean air filter, spark plug and change oil, adjust valves if possible or noisy, done!
Usually answered in minutes!
239 Questions
29 Questions
21 Questions
7 Questions