rpm. On the 1984 it is on the left side of the bike right up front behind the clutch cover. the best to fix is to get a manual for a 85 and up yz 125, (forgot if it is hayes or chiltons, think hayes),
...u perform this procedure yourself to use carb dip. using just carb spray does not work remove all adjustment screws and washers and dip the carb this will remove oxidation and road film from the ...
...loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture screw improperly
Question about 2003 YZ 125
...loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture screw improperly
Question about 2003 YZ 125
...loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture screw improperly
rpm's and adjust the idle adjustment bolt accordingly for 950-1050 rpm if necessary, adjust the air fuel mixture bolt 1/4 turn at a time and let the engine settle for about 10 seconds, clockwise for a
Usually answered in minutes!
652 Questions
147 Questions
12 Questions
8 Questions
7 Questions
