Questions & Answers for: adjust door latch 2

...door closed, adjust latch hook by moving it back and forth, and up and down. In and out play of the door allowed by the upper and lower position of the latch hook should be less than 0.5mm. The ...

door latch mechanism and I have replace that, but it still fails to connect with the bar, although the latch bar has been lowered to it's lowest adjustment level. in order for someone to help you tell

...to latch, adjust the latch to let the door close more easily. If you can't see any way to adjust the latch, yours may be fixed in a certain position. Check for other reasons for the latching

...adjust the door, it seems to drop about 1/2 an inch when you open it. Any suggestions? Remember that there is a little play in the hinges, even new ones, enough that just a slight degree of play at ...

...adjust the latch to let the door close more easily. If you can't see any way to adjust the latch, yours may be fixed in a certain position. Check for other reasons for the latching problem. If the ...

...2 screws or small bolts you will loosen to slide the lever or the latch plate to adjust so the door closes tighter. 4. If ok, then the water level sensor will have to be replaced by a qualified

...door and, while pulling out on latch handle, slip the ring over the latch handle and get it into approximate position. Let go of latch (it snaps into "closed" position) and adjust ring so it doesn't ...

...door and the latch at the bottom of the door did not move, cause the door to bounce back and not lock,. How would i fix this? thanks jeff Take your finger and rotate that little gear on the latch on ...

...a hhr stay closed Back door on the wont latch All door has adjustable latch ,you need Allen wrench to do that There are 2 lugs one on either side...over time they become loose and need to be

...adjust the high of the door correctly, so i loosened all the hinge bolts and lifted the door to line up correctly, with 2 hinge bolts tightened. but now that it will shut all the way, it will not ...