Questions & Answers for: how do i adjust the carbs

Ad

Question about 2005 RM-Z 250

1 Answer

Idle adjustment hello my bike is running to high at idle and i cant fint an adjustment skrew to adjust it If there is not a screw on the side of the carb then look at the top of the carb where the ...

Ad

...cleaned carb. with cleaner. Installed carb kit. Replaced carb to intake gasket. Checked reed valve. Adjusted metering tab to Walbro specs. Carb type is Walbro WT. Removed adjusting screws before ...

Ad

...carbs adjust the other slides to the same height as that base carb as close as you can. Measure if possible to get all the carbs as close as possible to each other. you may have to adjust the idle ...

carb needs adjustment running rough and shaking carb needs adjustment running rough and burning alot of gas . just purchased old owner said he rebult carb but couldnt get it adjusted rite. sounds like

Question about 1990 XJ 600

1 Answer

...adjust the carb. The manufactures make it difficult for you to do this because: The carbs are preset from the factory to give the best performance and best EPA (emissions) You can get carb adjusting ...

Question about 1990 XJ 600

1 Answer

...till highest vac setting. then match next carb to first carbs settings (same vac) if u can't match adjust first carb to 2cd carb's highest vac setting. make sure engine is warmed up first.then ...

...adjust them but there are four carbs on the bike. So how am I to sync the carbs with only three screws? To sync the carbs on a bike that has four carbs on it and only three screws. There are only ...

Question about Gas Blower 135 MPH390 CFM Blower PB250

1 Answer

echo pb250 blower how to adjust carb. the new carburators do have adjustments but consumer is not allowed to adjust do to epa regulations find an echo dealer or echo repair tech with tools to do job ...

Question about Gas Blower 135 MPH390 CFM Blower PB250

1 Answer

...Carbs are mostly "locked up", no adjustments other than idle, and for "syncing". To adjust idle there a screw up on the linkage where the cable attaches, and a bellcrank that moves all 4 carbs ...

Power mate 43cc tiller bogs down when press the throttle. Where is idle adjustment screw? Cleaned carb. changed plug still the same.Cannot find an adjustment screw. Perhaps it has no adjustment screws

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6517 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...