unit or adf. Unit was plugged into a surge strip during a lightening storm that spiked several server UPS batteries but I can find no damage to the unit. Flatbed works perfectly. Unit also had the new
adf unit no copy and fax send from adf unit but document will go through adf at both time and machine give error doument misfeed, reload again. First try reseting the unit by holding the * key and the
glass and adf? If it is just the adf, you need to clean the adf slip glass. The small piece of glass next to the copy board glass. If that is not the fix, it could be the Drum Unit or the Fixing unit.
...unit ADF) which indicates ADF (back) lamp intensity check. Please follow the steps provided below: 1. Is the lower glass (white sheet guide)of the reading section dirty? Open the ADF, and clean the ...
...adf pick up unit, two sensor located in it 1. paper leading edge sensor, located upper portion of the unit.2. paper out sensor located back side of the adf pick up unit. Carefully open this unit your ...
...ADF unit is the grey paper tray located on the top of the scanner unit. Check the following points if it does not feed paper, or you receive an "ADF jam" error message: Figure 6. The ADF unit. Check ...
...ADF Unit. Cleaning the ADF delivery system Please visit the above link and follow the procedure to perform regular maintenance of the copier. Hope it helps! Good Luck! Thanks for using Fixya! ...
Question about Workforce 545 Wireless All In One Printer Scanner/copier/fax W/ink
...pair plug into a board where the data cable comes in; the panel slides off rearward after you take out one screw. Several plugs go up to the ADF. Videos of how to resolve ADF issues: Clean ADF
Question about Workforce 545 Wireless All In One Printer Scanner/copier/fax W/ink
What is read sensor toshiba studio 350 of adf? Hi, The ADF sensor detecting the sheet if it present or not in the ADF unit. ADF = Automatic Document Feeder.
Question about Workforce 545 Wireless All In One Printer Scanner/copier/fax W/ink
...ADF unit on an MFC-L8900CDW? Yes, I do. Here are the directions for replacing the ADF unit on an MFC-L8900CDW: Tools and Materials Needed: Phillips screwdriver Flat-head screwdriver Pliers New ADF ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions