...ac compressor running whenever its 49 degrees and higher. it does that to get rid of humidity faster. the pulley works off the ac clutch behind the pulley so you have a locked up clutch. find a belt ...
...ac compressor turn belt tensioner counterclockwise or lift forward then run pulley belt around crankshaft pulley and around AC compressor,run pulley belt around power steering pump then around ...
Question about 1994 G20
...ac compressor is seized .I need to replace belt but I need to bypass the ac pulley.Do i need to buy a bypass pulley? If the pulley on the compressor will not turn freely, then yes if a bypass pulley ...
Question about 1994 G20
...for the belt to be tensioned to drive everything else pull the pulley off the compressor and fit new bearings or if the pulley still spins when the ac is not on , disconnect the wire to the ...
...AC compressor is one. If this is the one breaking, your compressor is not far behind. The resistance of the compressor is minimized by proper oil TYPE and proper quantity of oil and freon to keep the ...
Question about 1994 G20
...ac compressor pulley wont turn. Am I able to bypass the ac compressor with the serpentine belt? no disconnect the power wire to the ac compressor clutch that will isolate the compressor if it has ...
...ac compressor at the moment so I'm bypassing it without the bypass pulley All engines use but one belt, in place of the AC compressor is a "AC DELETE" pulley. You can buy these pulley from a company ...
...ac compressor shot Buy a AC bypass pulley, it saves a lot of hassle and is a bolt on accessory. Mitsubishi A/C Compressor Bypass Pulley ' Advance Auto Parts https://shop.advanceautoparts.com > find > ...
Question about 1994 G20
...AC compressor pulley with a shorter belt? Yes, this is possible. However, unless it was the AC compressor clutch and pulley which failed, bypassing the AC pulley is unnecessary. Simply disconnect the ...
Question about 1994 G20
...ac compressor with this item $40.00-50.00 Question edited for clarity and toss in a load of CAPS. That is not the way you do it. You remove the compressor and put a bypass pulley in its place. The ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions