...There is usually an inspection plate that allows you to look at the belt. You are looking for cracks on the inside of the belt or outside. If anything like that exist, you need to have it
how do i replace my serpentine belt U will have to loosen the belt tensioner or it may be the alternator u need to loosen. There is always to loosen the belt and after that your belt will come right ...
Replaced serpentine belt and idler pulley guide wheel, belt keeps jumping off Replace the tensioner, and or tighten tensioner for the belt.
...I have read my manual but it doesn't have anything about the timing belt. Most car manufacturer advised to replace the timing belt at 100,000km/ 2years which ever comes first But most car ...
ac belt on 07 ford fusion ween i start the car and cut the ac on it starts to sqwil how do i replace it ...
surpentine belt keeps popping off little bit of squealing coming from serpentine belt It is time to replace the belt tensioner.
...self adjusting (non-adjustable) belt tensioner. If the belt is from 2008, you wouldn't go wrong replacing it. However, if it is really loose, either your tensioner spring has crapped out or the belt ...
...belt has come off on my 2006 Ford Fusion with a 4Cyl engine. Have had the valve cover gasket replaced due to excess oil on belt and the cover was leaking. Have had all the pulleys cleaned and the ...
How do i replace belt in a 08 ford fusion Anon, Take a picture of belt routing before you start as you may forget how to route belt when putting new one on. Check the attached links,instruction and ...
...bypass a/c compressor please? You remove the compressor and put a Bypass Pulley in its place. The routing and belt remain the same. https://www.google.com/search?q=2007+Ford+Fusion+AC+bypass+pulley
Usually answered in minutes!
750 Questions
244 Questions
135 Questions
91 Questions
53 Questions