Questions & Answers for: Ford Explorer ac belt replacement

...has to be a really crappy alternator..but why did the belt brake??? was it old or did it squeel ... is the ac turning easy start taking off belts and turning components by hand feel how they

belt, possibly alt. ps pump, ac,etc. timing covers need to come off along with the crankshaft pulley. if it is a DOHC there will be 2 gears on the top, with a tensioner and a pulley for the waterpump,

...to do in order to install it. Serpentine belt, correct? You'll need to find the correct belt size for an Exploder w/out AC. You may need to remove the AC compressor, if the pulley is in the way. ...

...on gas it dies, when you let up on gas ac comes back on again The A/C compressor clutch is slipping. Before going to the expense of having it replaced tighten the belt that drives the compressor

...belt is not slipping,then check the voltage at the battery with the ac on high blower,and the headlights on.It should read 13.65 volts,to 14.25 volts,any less then replace the alternator.Check this ...

...belt so is that part going out The AC compressor has seized up causing the ac compressor clutch to hold hold the belt while the engine is running. Consider replacing the compressor along with the ...

belt that is the problem it could be the A/C clutch that is squealing or the A/C compressor unit cheers. its the ac clutch, i have a 96 explorer xlt v8 5.0 l I had to replace mine it started squealing

...belt to bypass the compressor so she could at least drive. I tried to turn the compressor by hand and no deal. Could it be the clutch or am I looking at replacing the compressor? Anyone have any ...

2003 explorer eddie bauer edition 4.6 a/c clutch. any way to bypass with a smaller belt? They make an AC idler pulley replacement, but you have to remover the compressor.

...edition. A/C compresser froze up . any way to bypass the ac with a smaller belt. They make an AC idler replacement pulley, but you have to remove the Compressor and put on the pulley, but it