Questions & Answers for: Mazda Protege ac belt

ac belt of there is also a pully that you need to adjust so you can slide the belt around that as well / reminder loosen compressor bolts so that you can manuever the belt around that and then get the

Belt Diagrams for your 2002 Mazda Protege 5 2.0L DOHC In-Line 4-Cylinder Engine; along with various engine options (AC/No AC, etc.). Included are Instructional Diagrams for loosening (for removal) and

...belt on mine. Right underneath the AC is a tension bolt, just loosen it up enough and the AC unit should roll down to loosen the first belt. You need to do the same process for the other belt. That ...

belt (not ac) is squeaky both belts have been replaced. new ac compressor, etc. bought new expensive belts and it still squeaks. can i wash it somehow or how to stop the horrible noise? The squeeking ...

...Belt Diagrams, one which will match your specific (AC/No AC, Power Steering, .etc) that you will need. ...

...ac the belt for the ac is a heat shrink belt, which means it has to be replaced with the alternator belt, you have to cut it off, if you try to reuse the smaller ac belt on the out side it will not ...

This is the third time in two years that I've had to replace my water pump on my 2002 Mazda Protege 5. This first replacement was a refurb. The second was new. Just got a third new one. After the ...

need a diagram for 1996 mazda protege serpentine belt can any body help you don't have a serpentine belt just two drive belts one power steering and ac to crank belt and one alt belt

...It looks like the ac belt also runs the power steering on the 1.5 engine. Removing the belt would cause you to loose your power steering. You could still drive the car, but not without

...AC clutch as the pulley has already been replaced. If your car has an adjustment for the belt, I would suggest you tension the belt a little more first. A slack or loose belt would also cause that ...