Questions & Answers for: abs lits stays

abs on dashboard stays lit all the time. i have a 2000 nissan sentra exalta, the abs light on the dash remains lit. i've had the brakes checked and there seems to be no problem, the brake fluid level ...

Ad

Question about 2000 Jetta TDI

2 Answers

abs light stays on abs stays lit on a 2000 jetta 2.0 gas Can you get more information, if you can, have the vehicle scanned. You need to know what has failed. car needs to be scanned with a tool ...

Ad

Question about 2000 Jetta TDI

1 Answer

abs and brake light staying lit abs and brake light coming on when starting engine and staying lit. What could be causing this? First you have to plug in a OBD II reader and pull any codes. From there

Question about 2001 Rodeo

1 Answer

...extinguish. This is normal operation. If it stays lit there is a problem and the ABS will not be available, although the brake system is still fully operational. Leave a message if this is not

Question about 2001 Rodeo

1 Answer

abs light stays on That indicates that the ABS (anti-lock brakes) need service. You should bring it to a mechanic to be repaired. When the ABS light stays lit you will only have normal brake ...

Question about 2001 Rodeo

1 Answer

...abs traction light go off wrench light stays lit until restart car has detected a problem with itself could be 1 of a hundred things auto parts store will pull code from car to tell you the problem ...

Question about 2003 Astro

1 Answer

ABS light is on If your ABS light is staying lit: you need to have the computers scanned for codes, as the light is the Check-Engine light for the ABS system. It also means your ABS system is disabled

Question about 2004 Civic

1 Answer

...ABS and Brake light stays lit. I've disconnected the battery and even tapped on the abs module for two days the lights would light up on starting car and then about 3 seconds later turn off. Then ...

Question about 2004 Explorer

1 Answer

...ABS light on the dashboard stays lit check all the sensor units and wires at the wheels . The track stabilisation also use the sensors and wires . Run fault codes and check for abs and other faulty ...

...abs lamp is on and can hear/feel noise under brake pedal. then all wheel drive off indicator comes on, noise stops but abs lamp stays lit. Get the trouble codes read. That's ALWAYS the starting

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...