Questions & Answers for: Land Rover Discovery abs light stays on

hand brake, abs and tc lights stay on Take the vehicle for a scan.... With the brake system, don't take chances. Regards Johngee10

abs warning light stays on no problems with brakes the abs warning light is constently on the brakes ave bin checked no problems. 1 relay was replaced problem still exsists. thanks danny The brakes ...

...light and abs light, all three lights staying on after engine has started probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS ...

Discovery warning lights staying on after engine started After engine is switched on, the ABS, traction control and hill descent warning lights are remaining on. Suggestions please? try disconnecting ...

...abs light stays on and tc light stays on Hi, Change the switch - it's above the brake pedal. That will probably account for the ABS light and the brake lights being stuck. Note that you may have more ...

abs warning light comes on and stays on whilst driving had abs system checked for codes comes up with no fault codes found. light cant be turned off until u switch off the engine and turn back on ...

abs warning light comes on and stays on whilst wv bora 2000 w reg abs warning light comes on and stays on whilst driving had abs abs system checked for codes comes up with no codes found garage is ...

abs light stays on but brakes appear fine generally when the light comes on you have a bad wheel speed sensor or abs unit soleniod . the wheel speeed sensor might be all part of the wheel bearing ...

...ABS light coming on is a faulty wheel speed sensor. Your vehicle will still drive normally, but your ABS light means you don't have Anti Lock Brakes functioning. An easy way to figure out what is ...

traction control, ABS and hill decent lights come on and stay on and now got a clunking noise coming from engine or underneath at the front My 2001 land rover Discovery TD5 had the traction control, ...