Questions & Answers for: Toyota Sienna abs jumper

Question about 2002 Sienna

2 Answers

Toyota Sienna 2002 Amber warning lights keep coming on and dealership suspects faulty ABS ECU (computer). Cost is $1500. Car is functioning fine...any other possible culprits? If it's the ABS module, ...

Ad

Question about 2002 Sienna

1 Answer

these manuals leave a lot to be desired. there appears to be a speed sensor on every wheel with the abs actuator assembly(including ecu) is attached to the brake booster. the manual says. . . .The ABS

Ad

Question about 2002 Sienna

1 Answer

I have toyota sienna 2002 . ABS warning is coming on and off while driving. I checked with the local mechanic. He changed the wheel air pressure censor and changed the connecting wires too. but still ...

Question about 2002 Sienna

1 Answer

Trac Off, ABS, and VSC indicator lights are on...I was involved in a front end fender bender but nothing major just the fender and bumper damage. but these lights would not go off. 2010 Toyota Sienna ...

...jumper cables to my battery today. Had to charge it 20 minutes to start the engine. Can't find a picture of the suspected part in my Haynes manual, but it may be in the correct location for ...

Question about 2004 Sienna

1 Answer

sienna abs ABS PUMP GOES ON AT END OF BRAKING, COMING TO A STOP SIGN AND AS YOU STOP YOU FEEL AND HEAR THE PUMP COME ON If you have no ABS light on in dash the condition is normal

Speedometer/odometer stopped working. My local dealer's service department said that the abs ecu needs to be replaced for $2,500. I shopped around for the part and another dealer sold me the part for

...toyota sienna Computer analysis says error code PO500 speed sensor A. However, Tire light is on, ABS, VSC, and brake light is on. There is no anti-lock braking going on. have to do it the old way.

Question about 2004 Sienna

1 Answer

ABS light inside the car my ABS light stays on i dont know what to do Abs light on means some fault codes stored in your car,TOYOTA IT2 can help you clear the code and turn off the light with airbag.

what cause abs and brake lights to be on they were cleaned the ABS light is on to indicate that there is a fault in the ABS system. The brake light will also illuminate when the ABS light comes on. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...