Questions & Answers for: 99 isuzu trooper tod check

Question about 2002 Trooper

2 Answers

tod problem 4x4 not angege isuzu trooper 2002 check the sensor under truck on the front of transfer box... if tod is not lite up on dash check relay and fuses chare near the driver not open

Ad

...isuzu trooper flashes. It's on the T.O.D (torque on demand)control panel. Also, the rear wheels on the T.O.D. stay illuminated green. Anybody know what we should do? Seems there is only one Isuzu ...

Ad

...Trooper - the TOD light, that is. Took it to a good shop for diagnosis. They said the TOD sensor was bad and it would cost abot $480 for the part. We were looking at a hefty bill, so decided to do ...

...Isuzu Trooper TOD won't go into 4 whl drive. TOD light just flashes. Check engine light not on. Someone told me it might just be a malfunctioning senser. No dealers in my area. Any thoughts or ...

...for when the TOD is not engaged. When it is engaged the fronts will light up according to how much torque is being sent to them. As long as the "CHECK" light on your TOD display is off, you are

Question about 1997 Trooper

1 Answer

...TOD on the dash starts flashing. If I switch into 4WD, it goes off and stays off. I recently replaced the starter. Could this be related? What else might be going on? my 99 honda crv, 2 wheel drive. ...

what years auto transmission fit a 1999 4X4 Isuzu Trooper Limited w/TOD power/winter drive? Isuzu changed trooper models in 1998-99 if yours is the older type then 1992-98 if the newer type then 99-05

...99 isuzu trooper (jackaroo) 3.5 liter 4wd with torque on demand my jssue is the check rear wheel's lights blinks green then red if I put it in 4wd the rear wheel light indicator gose green the rear ...

Question about 2001 Trooper

1 Answer

TOD Check light? My check light under the TOD keeps flashing on and off. Please help me what should I do? Have a local shop or auto parts store perform a "Fault Scan" - Most good auto parts stores ...

...trooper , USA? TOD? "torque on demand" and "auto" in the center where the transfer ... first check all fuses then scan it, that is right you must scan the PCM first. and report all DTCs, if that is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...