Questions & Answers for: 98 trooper 4wd working

Trooper's transfer case into 4wd (Hi or low), the auto locking hubs do not engage. The 4wd used to work just fine, but this problem arose about a year or so ago. The trooper has about 120,000 miles on

Ad

Question about 1991 Trooper

1 Answer

trooper stuck in neutral while shifting from 4WD to 2WD the transmission got stuck out of gear. possible range selection detent switch not working causing to get stuck some times in one range only and

Ad

...98 Trooper - the TOD light, that is. Took it to a good shop for diagnosis. They said the TOD sensor was bad and it would cost abot $480 for the part. We were looking at a hefty bill, so decided to do ...

...98 isuzu trooper how do i remove front passenger cv axle for a 98 isuzu trooper Go to my profile I have just explained how to change a cv boot on a Trooper. The axle needs to be taken out to change ...

Question about 2001 Trooper

2 Answers

stuck in 4 wheel drive stuck in 4WD - Back it up on flat level ground about ten feet - takes the windup out the dive line so the 4wd can pull out . 97 trooper stuck in 4WD

trooper. My 4wd light will not go off even in 2wd and the other night went into 4wd all on it's own. the shop said a solenoid for the 4wd needs to be replaced. does anyone know what the part number is

Question about 2001 Trooper

2 Answers

...What's the standard labor hours to replace the starter on a 2001 Isuzu Trooper AWD, AT 3.5L. Thanks. most techs can replace it within 30 minutes or less 2.1 Labor hours for a 4WD Trooper ...

Question about 1999 Trooper

1 Answer

98 Isuzu Trooper. They don't have any. Is there another make and model of car that the alternator is compatible for my trooper? It looks like 98 and 99 troopers are the only one here is a site you can

Question about 1998 Trooper

1 Answer

is a special tool needed to remove the front disc on a 98 4wd isuzu trooper? Yes to remove the hub nut.

Question about 1998 Trooper

1 Answer

...98' Trooper. I took the vacuum actuator off and tested to see if it is stuck. It wasn't. If I applied vacuum to the blue it stayed in normal position and if I applied vacuum to the white it would ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...