Questions & Answers for: Goodman 6 sense manual

Goodman HVAC Package Unit My goodman package unit wont ignite for heat. I have reset it several times by cycling the breaker on the outside. I hear the gas flowing and the plug trying to light. I hear

...t-stat calls for heat the fan turns on and the status light flashes 5 times, which is false flame sensed. i have replace the ignighter and jumped all the the sensors and it still flashes 5 times. ...

...manual on your furnace. I think you need check the flame senor for proper output. if the output is correct you wil have to switch the electronic board. FLAME SENSOR (QUALIFIED SERVICER ONLY) Under ...

manual re-set, when the power to the computer is interrupted or the call for heat is interrupted the computer is reset and it will again attempt to re-start the furnace. The most common problems are:

...the blower in the basement kicks in and starts running. The compressor outside will stay idle. My sense is now that it is a problem with the electronics on the compressor. I've had some success

...manual....What does the furnace do??...Turn the power off (after you observe the code)...then turn it back on with a call for heat....What happens????The exhaust fan starts......then the ignitor ...

manual One blink does not tell you much, it tried 3 times to start and did not. On a call for heat, the 24 volt thermostat sends a signal to the control module. The control module will indicate a call

sense anything and the furnace doesn't get a signal it will usually cut the burners off and re-attempt the burner sequence again because it looking for that signal from the sensor. The flame sensor is

...sense to anyone out there? I thank you for your help. Another problem I seem to be having is there is a heavy condinsing of moister inside of the unit so much that is has started to leak out. I am ...

...sense the flame & the blower then kicks on from the time delay in the board. If you don't have any ignition, then something is wrong with either the ignitor, ignition module, pressure switch, ...