Questions & Answers for: Hotpoint 6 screwdriver

...the motor off. i find these are rather stiff fixing. if all bolts are off, prize off gently with a screwdriver or ...

...ring which is a wire around the lip of the seal typically joined with a spring., using a small screwdriver. the inner retainer is held together by a ratchet type assembly. prise one end of the ...

...YOU A GOOD BRIGHT TORCH? IF SO I REMOVED MINE WITH A TORCH IN MY TEETH & A SMALL FLAT ENDED SCREWDRIVER, IF YOU CAN SEE IT TURN OFF ALL POWER TO THE MACHINE FIRSTLY THEN USING THE SMALL ...

know what tool I need to remove the screws from the inner door. Has anyone experienced this before? screwdriver

I cannot undo the red filter cover in the footplate. How do I do it? Use either a flat blade knife or flat blade screwdriver to lever off the cover.

...them out with a small screw driver or something similar, and inside are 2 torx screws, get a torx screwdriver, and undo the 2 screws, if tyou don't have the correct screwdriver, you may be able to ...

...the motor to see if it is turning. If it isn't turning then unplug the unit take a small flat head screwdriver and using the screwdriver move the fins on the motor shaft they should spin without too ...

...cover on a Hotpoint RL63 fridge? I need to check the relay, compressor starter. Use a flat blade screwdriver and snap it

how do i get the belt back on To fit the belt use a long screwdriver. First put the belt on motor pulley, then try to put the belt on drum wheel as far as you can while holding the belt on motor ...

...tabs) and look for a small black box with a hole or a short protruding shaft. These often have a screwdriver slot to allow manual rotation in the event of a timer motor failure. If you find this, ...