Questions & Answers for: Polaroid 5a 250v

...may cause damage DO NOT USE THE 16V ADAPTER! The adapter you require appears to be rated at 12V x 5A a 60Watt unit you can replace most likely with similar switch mode unit rated at 12V and at

Is it my Power Board? I have a Polaroid 373b LCD. I would like to send the Power Board to you and let you repair it. Let me first tell you that I had the typical 2 year problems. I replaced the ...

what is the fuse type that goes next to the power plug for the FLM 2632 Polaroid flat TV? that is usally a 250V fuse, you can take this to radioshack they will match it up for you. dont shoot the ...

I have no power to the the whole tv set. Ih hve changed the power cord and nothing. The red led light that tells you if you have power dosen't come on niether. They said it was an invalid tv set but I

my charger plug in thing wont charge. is there anyway it can be fixed If it is the adapter, check, it is also sometimes, where it enters the plug, the cable can break here again, wiggle and check, if ...

...5A 250V. How ever, capacitors are more likely to fail on this television. The Polaroid FLM3701 has a problem with capacitors failing on the power supply board. If enough caps go bad, you will get no ...

...having a flashing light on inverter board. Turned out to be the F2  fuse replace with a 3.15A 250v ceramic axial lead fuse. I could not find the axial lead so i soldered some legs and it ...

Hi, my LCD Polaroid FLM-3701 went through a power outage and now doesn't get power any more. The power led doesn't show any light. I saw a capacitor repair kit available, and four 680 uF capac

...5A 250V. How ever, capacitors are more likely to fail on this television. The Polaroid FLM3701 has a problem with capacitors failing on the power supply board. If enough caps go bad, you will get no ...

...5A 250V. How ever, capacitors are more likely to fail on this television. The Polaroid FLM3701 has a problem with capacitors failing on the power supply board. If enough caps go bad, you will get no ...