and 1.6. the best thing to do is join the aa cost u aprox £ 8 to 14 pound a mth they will pick u up in any part off the uk if u brake down . and by the way it costs nothing for advice from any garage
Escort Mk2 1600 valve and torques settings what are they I want to know the valve clearances on a Mk2 1600 Escort cross flow engine and also cylinder bolt torque settings cylinder bolt torque settings
how do i adjust the valves in a ford 1997tarus with a 3.0 ohv Valve Stem to Guide Clearance · Intake 0.026-0.071 mm (0.001-0.0028 in) · Exhaust 0.038-0.083 mm (0.0015-0.0033 in) Valve ...
what is the torque on a 1994 ford taurus thermostat? I believe those are only 6 MM bolts, I wouldn't go more than 75-80 inch pounds. If they are 8 MM bolts you can tighten them to 15-18 foot pounds. ...
1984 F 150: what is the torque setting 300 head... What is the torque setting 300 head 70-75 foot pounds. Final torque must be reached in 3 equal steps, torque each to 25 foot pounds then 50 foot ...
torque specs 02 4.6 mustang intake manifold the upper are done to 89 inch pounds then another 90 degrees after all have been fone the 89 inch pounds. the lower is also two stage at 44 inch pounds then
Need torque specs for 2000 Ford taurus 3.0 flex fuel vehicle rod & main bearings main bearing caps 56-62 foot pounds connecting rod caps 1st pass 17 foot pounds 2nd pass 32 foot pounds........
cyl head torque specs focus 1.6 LX 07 1.6 LX cylinder head and main bearing bolts had a first step torque of 50 to 60 foot-pounds and a second step torque of 80 to 90 foot-pounds each. The rod bearing
relay FOAB-14B192-AA WHAT DOES THE RELAY fo ab-14b192-aa control FOAB-14B192-AA is a fairly common Ford relay. It used for switching high current loads such as lighting or A/C.
Torque wrench setting for 2007 ford escape camshaft caps 40 to 45 INCH pounds. Not foot pounds. 40 foot pounds will strip the threads out of the head.
Usually answered in minutes!
3,749 Questions
2,998 Questions
2,612 Questions
2,347 Questions
2,636 Questions