...and where is the module located someone could have pushed the 4x4 low button accidently, it will not engage but the 4x4 will flash up on your dash. just push the 4x4 auto button and it should ...
4x4 module (PCM) Wiring harness Gearmotor encoder contact plate Connector(s) Circuitry Mode indication switch (MSS) If an obvious cause for an observed or reported concern is found, correct the cause
...4x4 module. open glove box, bend the door stops in to the glove box to open the door fully. the module is black and has two connectors. located all the way to the right of the glove box. sometimes ...
Question about 2003 F350 Super Duty DRW SuperCab
4X4 module:F2-33, 2-31, 2-35, 2-34, the others are input to the module: brake ,DTR, 4whl sw.,& abs, each one of these tells the 4x4 module what to do and the out-put does the command...........Now
...4X4 module or the shift motor.To determine which of these three is malfunctioning, have your friend sit near the module. Press the 4X4 button and ask your friend to listen for the sound of the relays ...
Question about 1995 Blazer
...module. 4x4 high and low lights use to flash 3 times every 2 minutes, but they do not anymore. I have applied 12v to connector at transfer case, motor runs and goes into and out of 4x4 low. What year ...
Question about 1995 Blazer
...4x4 transfer case shift module 2002 Ford Explorer 4 wheel ... How To Install Replace 4x4 Transfer Case Shift Motor Ford ... ? 9:15 https://www.youtube.com/watch?v=9ldrtZODxQ8 Oct 26, 2010 - Uploaded ...
Question about 1995 Blazer
...4x4 low. Now 4x4 wont engage at all, were is the transfer module located? Module not behind glove box Car in Australia so is right hand drive Mechanical engineer from Ford can help with that
Question about 1995 Blazer
...also does not want to go in 4x4. It also affects the speedo . The Ford Dealer thinks it is the module Suggestions. Richard if everything checks out and the module doesnt i would assume its the ...
...be done . If it was my vehicle I would do that first . But ,then again I have a scan tool that can read code's in the 4X4 module. Auto zone , advance , pep boys etc... can not read these code's
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions