4g63 engine won't fire up after over revving it. 'B' timing belt brock and has been replaced along with the 'A' timing belt and the water pump. All the timing marks line up as recomended and do so ...
...timing belt broke at 60mph, no loud noise. eng still turns over. Have not taken the head off. can I just replace the belt Thanks, Chuck if you have the 1.8L engine, you can just replace the belt and ...
Question about 1994 Galant
...Timing belt procedures start on page 33. http://www.scribd.com/doc/4570538/Mitsubishi-4G63-4G64-Engine (P.S. this manual also includes the 4G63 engine, you can identify your engine by looking at the ...
...timing correct on my 1.8L 4G63 motor. i am tdc on #1. i followed the manuel and have bent the valves twice now. any step by step direction or tricks to gettn it correct for sure I have to give you ...
Timing Belt on a Mitshubishi 4g63 16v 2.0l sohc engine please? tdc @ 1cyl. cam shaft has triangle stamp mark on face of the gear.both valves for # 1 should be closed in compression stroke and triangle
4g63 need timing proceedure for mitsubishi 4g63 Sorry for the severe delay. I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to
...installation of the 4G63 SOHC timing belt: http://www.4shared.com/document/eilwHFMW/4G63_SOHC_Timing_Belt_Removal_.html do i have to take the timing belt off 2 do a water pump on a mitsubishi 4g63 ...
Question about 1995 Galant
...help me with a timing belt diagram including timing marks for a Mitsubishi RVR 4G63 E-N23WG-SNXF MODEL-------------EN23WG-SNXF CHASSIS----------N23W-5206359 ENGINE------------4G63 you tube your ...
Question about 1995 Galant
...timing belt on my colt bakkie 4G63, The mark on the head nd it doesn't have balancing shafts. Old ones have a mark on the timing belt, and you need a timing light that flashes on the belt; then turn ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions