Questions & Answers for: 470 25

...is 470 ft lb pionion brg pre load is 25-45 in lb Dana S110 pinion nut torque is 832 ft lb pinion brg pre load is 20-40 in lb Dana S135 pioion nut is 800 ft lb and pinion brg pre load is 10-40 in ...

470/25, 470/16v, 470/10v. I can replace all the larger capacitors (12), this will not be a problem for me. I have a DMM but lack knowledge of this type diagnostics. There are three pcb's, 1) has cable

...470. Shortly thereafter, I noticed a "humming noise" like driving over the non-skid grooves on a highway except much lower noise level. This noise starts at about 25 mph and continues through the ...

the menu screen keeps popping on and off CHANGE THE CAP THAT SAYS 1000 UF AT 16 VOLTS OR THE 470 UF AT 25 VOLTS SHOULD FIX IT RADIO SHACK HAS THEM FOR ABOUT 2.00 BUCKS EACH

blue light flashes on and off gateway flashes in the middel of screen Replace the 470 uF 25 volt capacitators on the power board, check the diode in the center of this group.

...2.0 Per Suzuki, tighten the cylinder head bolts to 25 Nm (18 lb-ft) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B. If this helps, please say so! Thanks!

...25 cc 1.5 cu in 2 cycle 215mph/470 cfm and it wont start help put in a new spark plug , filter gas filter. it has fire. the sparkplug fires when it wants to. just used it yesterday. sounds like ...

the faulty components and need replacing (try replacing them anyway). If the best you can get to fit in the supply (mechanical size 10 mm diameter x 20 mm high) is 470 uf, 25 volt these will also work

...and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B. I will post a picture

25 Nm (18 ft.Adjust the bolts to 70 degrees plus 70 degrees plus 30 degrees using the angular torque gauge KM-470-B.Sep 19, 2009 Looking for torque spec on my 2002 Daewoo Lanos head bolts and diagrams