Questions & Answers for: GMC Jimmy 410 flash

service soon engine light on ran scanner code p 410 secondary air injection flow air pump on the lower passenger front under shield and mounted to frame is bad they get water in them and lock up need ...

we have a 2001 Jimmy GMC. Is there a way to see if the air pump is bad? Keep getting 410 code. It won't pass emissions? P0410 is a fault of the A.I.R. pump and nothing else. AIR pump adds air to the ...

flashing codes engine giving problem hooked computer to it and it flashed a few codes....po0410 po0449 po0452 give autozone the codes and they will give yoy a print out a list of what will cause it or

the check gauge ligth in the board is flashing If light is flashing you are probably running rich. This could damage converters. Get it fixed and save lots of fuel mileage/

when trying to shift to 4wheel drive light flashes when it should be solid It sounds like it is not engaging the front axle. Try to move forward when it is flashing.

signal lights and hazards do not flash on dash or on outside of the truck Welcome to FIxYa.com Does the lights stay on but no flashing in dash? Thank you for using FixYa.com Regards, Lee Davidian

My check engine light flashed about 20 times this morning and then stopped flashing, but the light is still on If it flashes, it has major problems. Get it scanned asap at Autozone. It is free.

code 410 they told me it wasw a transmission solenoid which cost $42.00 . thats all good i dont mind paying 4 something that will fix my truck, right now it idles real high in 1st and 2nd but after i ...

my 97 Jimmy is shifted into 4hi and will not switch to 2hi, the lights flash and i hear a clicking but it wont shift we got a snow storme about a week ago, I pushed the 4hi button, it flashed then ...

2001 Jimmy 4wd light flashing going to buy this vehicle, when I push the 4wd button on the dash it starts flashing and continues to doso untill going back to 2wd. I thought it was suppsed to flash and