error Code im working on a customers scanner that is a fujitsu fi-2140c2. its giving me an error code of E3. if any know what that error code is, that would be great if you could pass that information
error with the Red led blinking and the TWAIN display will be "The multi feed is detected.(Code DS32006)". To resolve the issue, please follow the steps provided below: #Check if the documents satisfy
Question about fi-5900C Pass-Through Scanner
...error with detail code o5A in fujitsu fi-5900c scanner my fujisu fi-5900c scanner jams continousely , and displays u1 error with detail code o5A, i have clead all the sensor replaced the rollers ( ...
Question about fi-4750C Flatbed Scanner
...error message: On the scanner panel: Backside Optical alarm (G) On the TWAIN Driver: (Code: DS42001) Sense Key = 0x4 ASC = 0x680 We tried to clean the glass parts with no luck. Please advise, thanks. ...
error code "L" Hi, Is the code display L-6? This error code describes US Sensor Alarm. You may perform the following steps or may ask your local Fujitsu scanner expert for the disgnosys and ...
...error, what sensor is it Hello, The "E18 Sensor Alarm" is displayed when malfunction of sensors occurs. Check whether the cables between Control PCA and sensors are damaged and also check all the ...
Error Code : 0x5a Hello, The detail code 5a in Fujitsu fi-5900 scanner is displayed due to frequent paper jam error. To resolve this issue, you need to clean the two lenses of JAM1 sensor and check it
Usually answered in minutes!
109 Questions
61 Questions
76 Questions
33 Questions
26 Questions
