Questions & Answers for: 35 80 manual Dehumidifiers

Control panel explanation Hi, I am not having trouble with the machine, but bought a second hand HD 3000 with an LCD panel, but have no idea what the settings mean. Does 80% mean that I am trying to ...

...Manual Operation. Lower the humidity extraction level to 32% or 35% and allow the unit to run in that mode, rather than automatic. This will give you a good indication if moisture is being extracted ...

35%. If you don't have an LED screen on your unit, set the manual control to maximum.This way, you will extract the maximum amount of humidity and make your home more comfortable. Hope this helped

...min. then cuts off. More than likely, the humidity extraction setting is set to high. Lower it to 35% or if you have manually controlled (No LED Screen) unit, set the control knob to Maximum. Hope ...

...Manual. once the humidity extraction level is set at 35%, you should push the minus (-) key one more time to turn the unit ON. It will now run continuously no matter what the humidity level is until ...

...one with an LED screen. If that's not the case lower the numbers using the air down button to 35%. Hope this helps you and thanks for choosing

...80 degrees . There is a model that is called a Low Temp model, that's designed for low temperatures in basements. As far as your problem is concerned, there are 5 basic, yet solvable reasons for ...

Manual and the unit is not collecting water after running for hours. Make: Airworks - Model: A1DMDA10AG If you have an LED screen on your unit, lower (arrow down) the humidity extraction level to 35 -

...manual and then after you understand that turn it on and set it accordingly. 35% for the humiodity might be a good starting pint. It has a refrigeration system that blows room air across the ...

...80% humidity at 50%. it consistently turned itself off. Ok on 35 and Lo. there is a sensor in the unit much like a temp sensor, (bullet shape) over time these do ware out and need to be replaced this ...