Question about WD-52525 52" Rear Projection HDTV
...lamp-Code 34-Lamp abnormality? WD52525 w/known good lamp, does not light up at all, but sound is OK! I get error code 34, fans seem to be working fine! Anyone have the PS and light engine cap fixes? ...
...Test indicates code 34-lamp abnormality? I had another problem kinda the same and emailed ctechnicians.com and they gave the fix. is the fans runing at all ? if not the set will not come on at
cde 3 4 I push the Menu and Device diagnostic code 3 4 34 = Lamp abnormality Try here for Osram lamps as cheap as I have found them: http://www.intl-lighttech.com/store/item_GTL-OS-69490
Question about WD-52525 52" Rear Projection HDTV
on error code 34 how do you check the ballast wd 52525 mitsubishi DLP There are two 1000uf 16V capacitors on the PWB that cause that problem code 34 lamp abnormality. If you need more info let me know
Question about WD-52525 52" Rear Projection HDTV
...cause with that model when it displays a 34 code which is lamp abnormality. if you need more information and I can psot a link where you can get the kit to repair your set with full
...on for 2 secs then led flashes red Is it flashing a two digit code such as 34 as thats a common fault with the WD52525 V26 chassis for a lamp abnormality caused by two bad capacitors on the PWB ...
...34 Lamp abnormality 35 Chassis Fan failure 36 Exhaust (Back Cover) or Lamp Ballast Fan failure 37 Engine (DMD or Lamp) Fan failure 38 Excess Lamp Temperature 39 Excess DMD Temperature 41 Short ...
...34-1 in konica 7055 This code refer to a fusing unit malfunction.High fixing temperature abnormality.The TH1(thermofuse) detects more 220 C.Possible causes the fixing heatre lamps or the thermistors ...
...34 Lamp abnormality 35 Chassis Fan failure 36 Exhaust (Back Cover) or Lamp Ballast Fan failure 37 Engine (DMD or Lamp) Fan failure 38 Excess Lamp Temperature 39 Excess DMD Temperature 41 Short ...
Question about WD-62327 62" Rear Projection HDTV-Ready Television
...for a while and now it just wont turn on the 34 error is a lamp abnormality, So if the lamp is new the Ballast or the Power Board could be the issue however the ballast would be more
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions