masterlink It reads "HD ERROR 178" New HD -- You could try to press play/rec on the boot up --may reset ...but, doubtful... Try to replace with a new 30gb drive > nothing larger. Mine just went out ...
32 bit'; - (w/updates). 200 GB HD; 3 Gb RAM; built-in Sigmatel audio. USB 2.0; Firewire; Tested audio products: - (all w/updates). XFi Extreme Audio; - (audio, but no 'stereo' mix option) EMU 1616; -
Question about Multimix 8 USB 8-Channel Mixer Spdif System
Alesis Multimix 8 Audio driver wont load Bought an Alesis Multimix 8 mixer and volume is very low when recording using USB connection Audio Driver wont load on my XP the mixer does not work damn that ...
problem with writting from hd to cd keep getting writing to hd error and error 609 try to reinstall the O.S. /firmware. the firmware is avail on the alesis site dave
Upon turning on our Masterlink, it read "LOAD OS". the mfg suggested a new Harddrive; which I installed. but noticed an electrical short (frying sound). Had electrical problem repaired last week. Now,
NO POWER UP ML 9600 says on screen,,,,,HD ERROR 177,,,No power up Either the HD is bad or you will need to reinstall the O.S. /firmware. the firmware is avail on the alesis site dave
WON'T POWER UP SHOWS HD ERROR 177 Either the HD is bad or you will need to reinstall the O.S. /firmware. the firmware is avail on the alesis site. hope this helps. dave
starts up wth this error. the HD/CD doesn't fix it. Please help. reload the os. it is avail on the alesis site. the o.s. may be corrupted and a reflash is what it needs. if the issue persist, the HD ...
...will probably need to be jumpered to limit it to 32 GB, but other than that, I don't know what to look for. Thanks. There is/was a list of compatible CD drives at alesis.com Any IDE HD drive will
Question about MasterLink ML-9600
...of the size of HD you put into it, the Alesis will only 'see' up to a certain amount of the HD. 32Gb? Says how much in the ...
Usually answered in minutes!
133 Questions
10 Questions
5 Questions