Questions & Answers for: 31cc yard machine tiller gas

Question about Products Yard Machines 158CC Tiller

0 Answer

How do I replace the pull cord on my 31cc yard machine tiller? carefully . the recoil spring will want to fly apart .

Ad

...yard machine 31cc cultivator 21A - 120R000 unit with primer bulb,,,,,line from gas tank with filter, goes to bottom of carb, from top of tank to suction side of primer bulb, from output of primer to ...

Ad

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

...gas tank and check the tube filter screen to see if its clogged.  Also check the side filter to see if its clean.  If you pulled the starter cord too much the carb could be over ...

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

yard machine cultivator runs wide open will not slow down I turned back throttle control still runs fast FLOAT IN CARB IS STUCK

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

What is the spark plug number for the 31cc 400 cultivator Yiou can use NGK BPMR7A or Champion RCJ7Y

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

How to remove the clutch? Is there a fastener to lossen? After removing the 4 screws and clutch cover you should be able to pull the clutch assembly off with a gear puller.

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

how to set time in my champion NO.: C82573-232 check flywheel key and air gap between flywheel and magneto 0.10 thousand of in. or use business card

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

yard machine 31cc tiller dies when moved from choke clean carburator

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

where can i find a carurator rebuild kit for my 21A-121R900 cultivator my cultivator will idle just fine but as soon as i try to give it gas it dies. i have replaced the fuel lines and spark plug with

Question about 121R 31cc 2-Cycle Gas Powered Cultivator/Tiller

1 Answer

I need a coil for a Model LDC 400 TILLER SERIAL NO. 90511999 THE PART NO. IS 791-683856 IT WILL NOT CRANK AND I KNOW THAT IS WHAT IT NEEDS www.yardmachines.com

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...